Product ID:M-PHENYLENEDIAMINE,SEALING COMPOUND
MSDS Date:01/01/1987
FSC:8030
NIIN:00-430-8303
MSDS Number: BJNLQ

Emergency Phone: 302-774-7500

Info Phone: 302-774-7500

Cage: FO317

Telephone: (800) 441-7515

Cage: FO317

M-PHENYLENEDIAMINE

CAS: 108-45-2

RTECS: SS7700000

ACGIH TLV: 0.1 MG/M3; 9192

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THERMAL BURNS MAY RESULT FROM CONTACT
WITH MOLTEN METAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN:EXPOSURE TO M-PHENYLENEDIAMINE MAY
CAUSE IRRITATION.THERMAL BURNS MAY RESULT FROM CONTACT WITH MOLTEN
METAL.INGESTION/INHALATION:N/K
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES/SKIN:WASH EXPOSED PARTS OF BODY WITH COPIOUS AMOUNTS OF
WATER MIN 15 MINUTES. OBTAIN MEDICAL
ATTENTION.INGESTION/INHALATION:N/K .

Flash Point Method:TOC
Flash Point:280F,141C
Extinguishing Media:WATER,CARBON DIOXIDE,FOAM.
Fire Fighting Procedures:IF PRODUCT IS EXPOSED TO FIRE OR INTENSE
HEAT,TOXIC FUMES MAY BE GENERATED.COMPLETE BODY PROTECTION MAY BE
REQUIRED.
Unusual Fire/Explosion Hazard:NONE EXCEPT THAT TOXIC FUMES MAY BE
GENERATED.HAZARDOUS DECOMPOSITION PRODUCTS:OXIDES OF NITROGEN.

Spill Release Procedures:USE NECESSARY BODY PROTECTION TO PREVENT
CONTACT WITH MATERIAL.CLEAN UP AREA FOLLOWED BY A THOROUGH WASHING
TO REMOVE RESIDUAL MATERIAL.
Neutralizing Agent:N/K

Handling and Storage Precautions:USE NORMAL CARE TO PREVENT BODY
CONTACT WHEN HANDLING MATERIAL.KEEP UNOPENED CONTAINERS IN COOL,DRY
STORAGE.
Other Precautions:PRODUCT QUALITY WILL DETERIORATE IF EXPOSED TO HUMID
AIR AND/OR ELEVATED TEMPERATURES.MATERIAL WILL DARKEN AND GIVE OFF
AMMONIA-LIKE ODOR DURING THE DETERIORATING STAGES.THIS IS
PARTICULARLY TRUE OF P ARTIALLY USED CONTAINERS.

Respiratory Protection:USE SUITABLE DUST RESPIRATOR.
Ventilation:LOCAL EXHAUST.
Protective Gloves:RUBBER
Eye Protection:CHEN SAFETY GOGGLES.
Other Protective Equipment:WHERE EXPOSURE IS LIKELY,PROTECTIVE RUBBER
CLOTHING SHOULD BE USED.
Work Hygienic Practices:N/K
Supplemental Safety and Health
VP:1 MMHG AT 100C,212F.MOLECULAR WT:108.14.WASTE DISP METH:WASTE
MATERIAL MAY BE INCINERATED.ROUTES OF
ENTRY:INHALATION/SKIN/INGESTION .

Boiling Pt:B.P. Text:547F,286C
Melt/Freeze Pt:M.P/F.P Text:145F,63C
Decomp Temp:Decomp Text:N/K
Vapor Pres:SEE SUPP
Vapor Density:3.85,AIR=1
Spec Gravity:1.139 (WATER=1)
Solubility in Water:SOLUBLE
Appearance and Odor:N/K

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:OXIDES OF NITROGEN.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS.COORDINATION WITH SUPPORTING
INSTALLATION AND/OR MACOM ENVIRONMENTAL COORDINATION PRIOR TO
DISPOSAL IS RECOMMENDED TO DETERMINE APPROPRIATE DISPOSAL METHODS
.(SEE SUPP)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.